DIY Face Mask Maker Machine Kit with 32 Collagen Pills, Includes Fruit and Vegetable Ingredients for Homemade Facial Masks, Quiet Operation, Touchscreen Interface.
Product Specifications:
Product Name: Fruit and Vegetable Mask Machine
Material: ABS + stainless steel liner
Power Supply: Straight plug
Use Voltage: 110-220V
Frequency: 50-60HZ
Maximum Power: 90W
Product Size: 11.9 x 9.9 x 15.1cm
Product List:
| 1X Host | 1X Power Cord |
| 32X Collagen | 1X Manual |
| 1X Cup | 1X Brush |
| 1X Puller |
Instructions:
1. Long press the power button to turn on the device.
2. Add 60ml of water.
3. Add 20ml of fruit juice.
4. Add a piece of collagen.
5. Press the operation button to make a mask.
6. Place the mask under the drain.
7. Press the drain button to drain the liquid in the mask.
8. Automatically enter the cleaning mode.
9. Add 80ml of water.
10. Clean the machine with a brush.
11. Press the operation button to start cleaning.
12. Press the drain button to drain the liquid.
Notice:
1. The total amount of liquid added to the machine must not exceed 90ml.
2. The machine is not waterproof, so please do not wash it with water.
Steps for Use:
1. Press and hold for 3 seconds to turn it on (the power button on the screen), add 60ml of water, then add 20ml of juice, and 1 capsule. Press the power on confirmation button to make a mask. After 5 minutes, a sound will indicate the mask is ready. Press and hold the liquid guide button to flow the liquid to the mask plate.
2. Cleaning: Add 80ml water and press the power-on confirmation button to enter the cleaning mode. After 5 minutes, a sound will indicate cleaning is complete. Press the water guide button to flow out from the bottom, and the machine will automatically shut down.
Product Specifications:
Product Name: Fruit and Vegetable Mask Machine
Material: ABS + stainless steel liner
Power Supply: Straight plug
Use Voltage: 110-220V
Frequency: 50-60HZ
Maximum Power: 90W
Product Size: 11.9 x 9.9 x 15.1cm
Product List:
| 1X Host | 1X Power Cord |
| 32X Collagen | 1X Manual |
| 1X Cup | 1X Brush |
| 1X Puller |
Instructions:
1. Long press the power button to turn on the device.
2. Add 60ml of water.
3. Add 20ml of fruit juice.
4. Add a piece of collagen.
5. Press the operation button to make a mask.
6. Place the mask under the drain.
7. Press the drain button to drain the liquid in the mask.
8. Automatically enter the cleaning mode.
9. Add 80ml of water.
10. Clean the machine with a brush.
11. Press the operation button to start cleaning.
12. Press the drain button to drain the liquid.
Notice:
1. The total amount of liquid added to the machine must not exceed 90ml.
2. The machine is not waterproof, so please do not wash it with water.
Steps for Use:
1. Press and hold for 3 seconds to turn it on (the power button on the screen), add 60ml of water, then add 20ml of juice, and 1 capsule. Press the power on confirmation button to make a mask. After 5 minutes, a sound will indicate the mask is ready. Press and hold the liquid guide button to flow the liquid to the mask plate.
2. Cleaning: Add 80ml water and press the power-on confirmation button to enter the cleaning mode. After 5 minutes, a sound will indicate cleaning is complete. Press the water guide button to flow out from the bottom, and the machine will automatically shut down.
Product Specifications:
Product Name: Fruit and Vegetable Mask Machine
Material: ABS + stainless steel liner
Power Supply: Straight plug
Use Voltage: 110-220V
Frequency: 50-60HZ
Maximum Power: 90W
Product Size: 11.9 x 9.9 x 15.1cm
Product List:
| 1X Host | 1X Power Cord |
| 32X Collagen | 1X Manual |
| 1X Cup | 1X Brush |
| 1X Puller |
Instructions:
1. Long press the power button to turn on the device.
2. Add 60ml of water.
3. Add 20ml of fruit juice.
4. Add a piece of collagen.
5. Press the operation button to make a mask.
6. Place the mask under the drain.
7. Press the drain button to drain the liquid in the mask.
8. Automatically enter the cleaning mode.
9. Add 80ml of water.
10. Clean the machine with a brush.
11. Press the operation button to start cleaning.
12. Press the drain button to drain the liquid.
Notice:
1. The total amount of liquid added to the machine must not exceed 90ml.
2. The machine is not waterproof, so please do not wash it with water.
Steps for Use:
1. Press and hold for 3 seconds to turn it on (the power button on the screen), add 60ml of water, then add 20ml of juice, and 1 capsule. Press the power on confirmation button to make a mask. After 5 minutes, a sound will indicate the mask is ready. Press and hold the liquid guide button to flow the liquid to the mask plate.
2. Cleaning: Add 80ml water and press the power-on confirmation button to enter the cleaning mode. After 5 minutes, a sound will indicate cleaning is complete. Press the water guide button to flow out from the bottom, and the machine will automatically shut down.